Power Pull Cracker – Cylinder Breaker with Core Pulling Screw Support
Maximum grip – even on minimal overhang
This precision-engineered breaker tool is designed for safely removing cylinders with barely visible overhangs.
Unlike traditional breaker tubes, it uses a clamping mechanism that applies pressure from underneath – ensuring maximum stability. For added security, a core pulling screw can be inserted into the cylinder to prevent the tool from slipping during use.
The tool head is detached from the handle, placed directly over the cylinder, and securely fastened. Perfect for emergency services, locksmiths, and authorities – especially when working with flush-mounted profile cylinders.
V-PRO Pulling Screws – Top Quality for Professional Door Opening
The V-PRO pulling screw was developed specifically for emergency services and locksmiths to remove profile cylinders safely, quickly, and reliably – without pre-drilling or a bit adapter.
Thanks to its self-drilling tip and special DELTA SEAL® coating, the screw can be inserted into the cylinder smoothly and with control – whether manually or with a cordless drill. The optimized thread geometry ensures maximum holding force in various cylinder profiles.
Special advantage:
Unlike other manufacturers, V-PRO pulling screws do not require pre-drilling with a smaller screw – they are inserted directly using a cordless drill.
Usage note:
Thanks to the DELTA SEAL® coating, no additional lubrication is required. In fact, adding oil or grease can lead to chip clumping and hinder chip removal – reducing performance.
Manufactured from a specially hardened alloy that withstands high tensile and torsional loads – ensuring maximum break resistance in professional use.
Key Features:
- No pre-drilling required – insert directly with cordless drill
- Self-drilling tip for fast penetration
- One-handed application without bit adapter
- SIT® 20 drive – powerful, precise & TORX20-compatible
- DELTA SEAL® coating for easy insertion
- Color-coded by diameter & embossed screw head
- Made in Germany – built for real-world operations
How often can a V-PRO pulling screw be reused?
Field tests have shown that a V-PRO screw typically lasts 4 to 8 uses, depending on the quality of the cylinders being pulled. In our training sessions, we sometimes reuse screws for economic and environmental reasons.
Important for live operations: We strongly recommend using new screws in real-world deployments. Each reuse increases the risk of the screw breaking – and the extra effort involved is not worth the small savings.
