Cracker for Euro Profile Cylinders – for breaking off protruding profile cylinders

Robust. Effective. Precise.

This solid-milled special tool is perfect when the cylinder protrudes slightly from the door fitting. Even minimal overhangs of approx. 2 mm are sufficient to use the breaker successfully.

Internally profiled, movable clamping jaws grip the cylinder firmly when the clamping screw is tightened. This enables a strong and controlled break – without hammering or damaging the door leaf.

Made of hardened special steel – built to last for daily use by fire departments, locksmiths, and authorities.

Scope of delivery

1x Cracker for Euro Profile Cylinders
1x Spare clamping screw
1x Hex key

Instructions

Application

Requirement: The cylinder must protrude at least 2 mm from the door fitting.

Slide the Cracker for Euro Profile Cylinders over the protruding cylinder
Tighten the clamping screw firmly using the hex key
Use jerky up-and-down movements to break the cylinder cleanly
Remove the broken half
Use needle-nose pliers to extract the cam from the lock case
Unlock the door using a building key